CommentaryThe etiology of pressure ulcers: Skin deep or muscle bound?☆
Abstract
Bouten CV, Oomens CW, Baaijens FP, Bader DL. The etiology of pressure ulcers: skin deep or muscle bound? Arch Phys Med Rehabil 2003;84:616-9. Pressure ulcers are areas of soft tissue breakdown that result from sustained mechanical loading of the skin and underlying tissues; they can affect the quality of life of many individuals. Despite considerable efforts to prevent pressure ulcers, data on prevalence are unacceptably high. This can at least partly be attributed to limited knowledge of the etiology of the clinical condition and the fact that identification and prevention of pressure ulcers mainly focus on skin tissue, even though the underlying muscle tissue may be more susceptible to mechanical loading. The present article proposes a new, hierarchical research approach to obtain improved insights into the basic pathways whereby mechanical loading leads to soft tissue breakdown. This approach investigates the relationships between (1) global mechanical loading at skin level, (2) the resulting local internal mechanical conditions within the soft tissue layers extending from skin to muscle tissue, and (3) the pathophysiologic response to loading. The latter response should be assessed from the various functional tissue units involved in soft-tissue breakdown[mdash]the cells, the interstitial space, and blood and lymph vessels. We predict that the proposed strategy will provide new fundamental knowledge about the etiology of pressure ulcers that can serve as a sound basis for effective clinical identification and prevention.
References (0)
Cited by (329)
Performance and safety assessment of materials used in the medical devices destinated for pressure ulcer management
2024, Journal of Tissue ViabilityPressure ulcers are a significant health problem that affects a large population, especially the elderly and individuals with physical limitations. These injuries cause pain, are difficult to heal, and can be expensive to manage, leading to a negative impact on the quality of life of those affected. This scientific paper provides an overview of medical devices such as support surfaces, dressings, and topical agents for preventing and managing pressure ulcers. This review focuses on the importance of understanding the viscoelastic mechanical properties, water vapor transmission rate, and biocompatibility testing of medical devices, which can help define performance criteria needed to prevent and manage pressure ulcers effectively. The paper highlights the potential use of alginate, polyurethane, silicone, polyvinyl alcohol, and collagen as pressure relief and wound care solutions. Synthesizing this research can help medical device manufacturers make better decisions and improve the quality of care for patients with pressure ulcers.
In vivo strain measurements in the human buttock during sitting using MR-based digital volume correlation
2024, Journal of BiomechanicsAdvancements in systems for prevention and management of pressure ulcers require a more detailed understanding of the complex response of soft tissues to compressive loads. This study aimed at quantifying the progressive deformation of the buttock based on 3D measurements of soft tissue displacements from MR scans of 10 healthy subjects in a semi-recumbent position. Measurements were obtained using digital volume correlation (DVC) and released as a public dataset. A first parametric optimisation of the global registration step aimed at aligning skeletal elements showed acceptable values of Dice coefficient (around 80%). A second parametric optimisation on the deformable registration method showed errors of and against two simulated fields with magnitude and , respectively, generated with a finite element model of the buttock under sitting loads. Measurements allowed the quantification of the slide of the gluteus maximus away from the ischial tuberosity (IT, average 13.74 mm) that was only qualitatively identified in the literature, highlighting the importance of the ischial bursa in allowing sliding. Spatial evolution of the maximus shear strain on a path from the IT to the seating interface showed a peak of compression in the fat, close to the interface with the muscle. Obtained peak values were above the proposed damage threshold in the literature. Results in the study showed the complexity of the deformation of the soft tissues in the buttock and the need for further investigations aimed at isolating factors such as tissue geometry, duration and extent of load, sitting posture and tissue properties.
Engineering the perfect mattress: The influence of substrate mechanics on deep tissue stresses in supine
2023, Clinical BiomechanicsWith increasing global interest in sleep hygiene, sleep ergonomics is an area that has been largely understudied. During sleep individuals turn over during the night to restore blood flow in occluded blood vessels, indicating that control of local tissue pressure may play a role in improving sleep comfort. This study investigates the influence of mattress stiffness on tissue compressive stresses during supine lying.
A subject-specific 3D finite element (FE) model of the pelvis area has been developed to simulate supine lying on substrates of varying firmness. Constitutive parameters for the adipose-skin tissue and muscle-organ tissue were calibrated using a novel application of the inverse finite element method.
The compressive stress was consistently greatest in the muscle interfacing the sacrum at 18.5 kPa on the soft foam, and 30.9 kPa on the firm foam. From soft to firm, the compressive stress increased by 67% at the sacrum, 20% at the ischium, 42% at the lesser trochanter, and 50% at the skin.
The non-linearity of the foam substrate had a pressure distributing effect, relieving the peak compressive stresses at the sacrum, indicating that it may be possible to design arrays of foam substrates that can provide most efficient pressure relief.
Advance in topical biomaterials and mechanisms for the intervention of pressure injury
2023, iSciencePressure injuries (PIs) are localized tissue damage resulting from prolonged compression or shear forces on the skin or underlying tissue, or both. Different stages of PIs share common features include intense oxidative stress, abnormal inflammatory response, cell death, and subdued tissue remodeling. Despite various clinical interventions, stage 1 or stage 2 PIs are hard to monitor for the changes of skin or identify from other disease, whereas stage 3 or stage 4 PIs are challenging to heal, painful, expensive to manage, and have a negative impact on quality of life. Here, we review the underlying pathogenesis and the current advances of biochemicals in PIs. We first discuss the crucial events involved in the pathogenesis of PIs and key biochemical pathways lead to wound delay. Then, we examine the recent progress of biomaterials-assisted wound prevention and healing and their prospects.
A review of the characterizations of soft tissues used in human body modeling: Scope, limitations, and the path forward
2023, Journal of Tissue ViabilitySoft tissue material properties are vital to human body models that evaluate interactions between the human body and its environment. Such models evaluate internal stress/strain responses in soft tissues to investigate issues like pressure injuries. Numerous constitutive models and parameters have been used to represent mechanical behavior of soft tissues in biomechanical models under quasi-static loading. However, researchers reported that generic material properties cannot accurately represent specific target populations due to large inter-individual variability. Two challenges that exist are experimental mechanical characterization and constitutive modeling of biological soft tissues and personalization of constitutive parameters using non-invasive, non-destructive bedside testing methods. It is imperative to understand the scope and appropriate applications for reported material properties. Thus, the goal of this paper was to compile studies from which soft tissue material properties were obtained and categorize them by source of tissue samples, methods used to quantify deformation, and material models used to describe tissues. The collected studies displayed wide ranges of material properties, and factors that affected the properties included whether tissue samples were in vivo or ex vivo, from humans or animals, the body region tested, body position during in vivo studies, deformation measurements, and material models used to describe tissues. Because of the factors that affected reported material properties, it is clear that much progress has been made in understanding soft tissue responses to loading, yet there is a need to broaden the scope of reported soft tissue material properties and better match reported properties to appropriate human body models.
Material, design, and fabrication of custom prosthetic liners for lower-extremity amputees: A review
2023, Medicine in Novel Technology and DevicesAs a physical interface, a prosthetic liner is commonly used as a transition material between the residual limb and the stiff socket. Typically made from a compliant material such as silicone, the main function of a prosthetic liner is to protect the residual limb from injuries induced by load-bearing normal and shear stresses. Compared to conventional liners, custom prosthetic lower-extremity (LE) liners have been shown to better relieve stress concentrations in painful and sensitive regions of the residual limb. Although custom LE liners have been shown to offer clinical benefits, no review article on their design and efficacy has yet been written. To address this shortcoming in the literature, this paper provides a comprehensive survey of custom LE liner materials, design, and fabrication methods. First, custom LE liner materials and components are summarized, including a description of commercial liners and their efficacy. Subsequently, digital methods used to design and fabricate custom LE liners are addressed, including residual limb biomechanical modeling, finite element-based design methods, and 3-D printing techniques. Finally, current evaluation methods of custom/commercial LE liners are presented and discussed. We hope that this review article will inspire further research and development into the design and manufacture of custom LE liners.
- ☆
No commercial party having a direct financial interest in the results of the research supporting this article has or will confer a benefit upon the author(s) or upon any organization with which the author(s) is/are associated.